How to stay warmer, burn less heating oil and …
Keep More Money in Your Pocket

Let me help you

Here’s one of the industries best kept secrets.

Unless you’re in the industry you wouldn’t know this tool even exists.

There’s a patented and proven technology that exist right now that’ll make you furnace burn less fuel

(Sadly few outside of the industry know about it.)

It’s called a Becket heating system Heat Manager or if you have a forced hot air furnace its the Intelledyne brand.

Their guarantee…Save at least 10% on heating oil usage or they’ll buy back their products.

I had the unit installed in my home in (2008) I saved $637.50 just that season (That’s 150 gallons at $4.25 per gallon)

BEFORE YOU START — READ THIS FIRST
Read how I saved a ton of money on oil usage… below

I saved a ton of money on oil usage…

Rather than getting a new boiler I just upgraded the burner. By changing my non retention burner to a new retention burner head it cost me a lot less and increased my efficiency HUGE. I was a lot warmer and I used a lot  less fuel. Here’s a few things I did…

• Do a energy audit so you can button up your home and keep the heat in and the cold out. I offer a do it your self version energy audit in the 87 tip section.

• Lower your hot water temperature, I suggest bringing it down to 120 degrees. You won’t notice a difference & you’ll see savings fast. See water heater savings tips.

Here’s the kind of thing you’ll find in my 87 heating tips

(listed through out this blog)

3 Top questions you need to be asking your service tech when they are working on your system so you look like you know what you’re talking about… they realize they can’t screw up or do a poor job.

(I’ve included a video of a tune up done properly with all the details in the resource section.)

1.) Was the chimney base repaired or cleaned?

This tends to be a dirty job. Lots of techs forget on purpose. Your chimney & your smoke pipe get filled up & don’t work properly.

It’s dangerous for you & part of the process that needs to get done.

2.) How does the furnace combustion chamber look?  Any cracks?

This tells the tech you know what your talking about. He’ll do a better job checking it. It’ll be safer for you (no dangerous fumes)

plus it’ll make it more efficient.

3.) Are all the seams in the smoke pipe sealed and is the heat exchanger cleaned really well?

This reminds him to be detailed. A small amount of soot can kill your efficiency so the cleaner the exchanger the better for you.

But make sure to look at all the savings tips since there’s savings to be had on every page.

And like I said, I use to charge as much as $99.00 for this information in a down load able e-book. BUT NOT ANY MORE.

Believe me, I know how tough it can be.

So let’s just call this my investment into the bank of good karma.

All this information is now on the site and it’s free.

So grab a hot coffee or tea and poke around the site. If you have any questions don’t hesitate to drop me a note.

Stay safe, Stay warm and save money.

P.S. Poke around the site and get the information free (start at the heating oil table of contents) or…

You can order the entire 87 tips suitable for printing…  (all organized and neat) with out any ads below.

You’re choice Have a look

furnace contracts